Document Retrieval on Repetitive Collections

Document retrieval aims at finding the most important documents where a pattern appears in a collection of strings. Traditional pattern-matching techniques yield brute-force document retrieval solutions, which has motivated the research on tailored indexes that offer near-optimal performance. However, an experimental study establishing which alternatives are actually better than brute force, and which perform best depending on the collection characteristics, has not been carried out. In this paper we address this shortcoming by exploring the relationship between the nature of the underlying collection and the performance of current methods. Via extensive experiments we show that established solutions are often beaten in practice by brute-force alternatives. We also design new methods that offer superior time/space trade-offs, particularly on repetitive collections.Comment: Accepted to ESA 2014. Implementation and experiments at http://www.cs.helsinki.fi/group/suds/rlcsa

A meta-analysis of resuscitative endovascular balloon occlusion of the aorta (REBOA) or open aortic cross-clamping by resuscitative thoracotomy in non-compressible torso hemorrhage patients

Background The objective of this systematic review and meta-analysis was to determine the effect of REBOA, compared to resuscitative thoracotomy, on mortality and among non-compressible torso hemorrhage trauma patients. Methods Relevant articles were identified by a literature search in MEDLINE and EMBASE. We included studies involving trauma patients suffering non-compressible torso hemorrhage. Studies were eligible if they evaluated REBOA and compared it to resuscitative thoracotomy. Two investigators independently assessed articles for inclusion and exclusion criteria and selected studies for final analysis. We conducted meta-analysis using random effect models. Results We included three studies in our systematic review. These studies included a total of 1276 patients. An initial analysis found that although lower in REBOA-treated patients, the odds of mortality did not differ between the compared groups (OR 0.42; 95% CI 0.17–1.03). Sensitivity analysis showed that the risk of mortality was significantly lower among patients who underwent REBOA, compared to those who underwent resuscitative thoracotomy (RT) (RR 0.81; 95% CI 0.68–0.97). Conclusion Our meta-analysis, mainly from observational data, suggests a positive effect of REBOA on mortality among non-compressible torso hemorrhage patients. However, these results deserve further investigation

A Modeling Framework to Assess Strategies Alignment based on Collaborative Network Emotions

[DE] The Collaborative Networks (CN) discipline has been largely studied in last decades, addressing different problems and proposing solutions for the robust establishment of collaborative processes, within the enterprises willing to collaborate. The main aim of CN research is, therefore, to generate approaches that enable creating effective relationships in the long term, to achieve stable and agile alliances. The concept of alignment among the CN partners has been considered since the beginning of CN research. Nevertheless, novel perspectives of study in CN, such as the consideration of collaborative emotional states, within the CN, have been introduced in recent years. This paper connects the research area of strategies alignment and the CN emotion models. Accordingly, a modelling framework to assess strategies alignment considering the emotional environment within the CN is proposed. The modelling framework allows representing how the enterprises emotions affect in the selection and alignment of formulated enterprises¿ strategiesAndres, B.; Ferrada, F.; Poler, R.; Camarinha-Matos, L. (2018). A Modeling Framework to Assess Strategies Alignment based on Collaborative Network Emotions. IFIP Advances in Information and Communication Technology. 534:349-361. https://doi.org/10.1007/978-3-319-99127-6_30S349361534Camarinha-Matos, L.M.: Collaborative networks in industry and the role of PRO-VE. Int. J. Prod. Manag. Eng. 2(2), 53–57 (2014)Andres, B., Poler, R.: Models, guidelines and tools for the integration of collaborative processes in non-hierarchical manufacturing networks: a review. Int. J. Comput. Integr. Manuf. 2(29), 166–201 (2016)Bititci, U., Martinez, V., Albores, P., Parung, J.: Creating and managing value in collaborative networks. Int. J. Phys. Distrib. Logist. Manag. 34(3/4), 251–268 (2004)Carbo, B.: Align the organization for improved supply chain performance. ASCET Proj. 2, 244–447 (2002)Macedo, P., Camarinha-Matos, L.: Value systems alignment analysis in collaborative networked organizations management. Appl. Sci. 7(12), 123 (2017)Andres, B., Poler, R.: A decision support system for the collaborative selection of strategies in enterprise networks. Decis. Support Syst. 91, 113–123 (2016)Andres, B., Macedo, P., Camarinha-Matos, L.M., Poler, R.: Achieving coherence between strategies and value systems in collaborative networks. In: Camarinha-Matos, L.M., Afsarmanesh, H. (eds.) PRO-VE 2014. IFIP AICT, vol. 434, pp. 261–272. Springer, Heidelberg (2014). https://doi.org/10.1007/978-3-662-44745-1_26Ferrada, F., Camarinha-Matos, L.M.: A system dynamics and agent-based approach to model emotions in collaborative networks. In: Camarinha-Matos, L.M., Parreira-Rocha, M., Ramezani, J. (eds.) DoCEIS 2017. IFIP AICT, vol. 499, pp. 29–43. Springer, Cham (2017). https://doi.org/10.1007/978-3-319-56077-9_3Campuzano, F., Mula, J.: Supply Chain Simulation. A System Dynamics Approach for Improving Performance. Springer, London (2011). https://doi.org/10.1007/978-0-85729-719-8Camarinha-Matos, L.M., Afsarmanesh, H.: Collaborative networks: a new scientific discipline. J. Intell. Manuf. 16(4–5), 439–452 (2005)Vicsek, T.: Complexity: the bigger picture. Nature 418(6894), 131 (2002)Sterman, J., Richardson, G., Davidsen, P.: Modelling the estimation of petroleum resources in the United States. Technol. Forecast. Soc. Chang. 33(3), 219–249 (1998)Vlachos, D., Georgiadis, P., Iakovou, E.: A system dynamics model for dynamic capacity planning of remanufacturing in closed-loop supply chains. Comput. Oper. Res. 34(2), 367–394 (2007)Campuzano-Bolarín, F., Mula, J., Peidro, D.: An extension to fuzzy estimations and system dynamics for improving supply chains. Int. J. Prod. Res. 51(10), 3156–3166 (2013)Barton, P., Bryan, S., Robinson, S.: Modelling in the economic evaluation of health care: selecting the appropriate approach. J. Heal. Serv. Res. Policy 9(2), 110–118 (2004)Eldabi, T., Paul, R.J., Young, T.: Simulation modelling in healthcare: reviewing legacies and investigating futures. J. Oper. Res. Soc. Spec. Issue Oper. Res. Heal. 58(2), 262–270 (2007)Andres, B., Poler, R., Camarinha-Matos, L.M., Afsarmanesh, H.: A simulation approach to assess partners selected for a collaborative network. Int. J. Simul. Model. 16(3), 399–411 (2017)Gohari, A., Mirchi, A., Madan, K.: System dynamics evaluation of climate change adaptation strategies for water resources management in central Iran. Water Resour. Manag. 31(5), 1413–1434 (2007)Fishera, D., Norvell, J., Sonka, S., Nelson, M.J.: Understanding technology adoption through system dynamics modeling: implications for agribusiness management. Int. Food Agribus. Manag. Rev. 3, 281–296 (2000)Lyneisa, J.M.: System dynamics for market forecasting and structural analysis. Syst. Dyn. Rev. 16(1), 3–25 (2000)Borshchev, A., Filippov, A.: From system dynamics and discrete event to practical agent based modeling: reasons, techniques, tools. In: The 22nd International Conference of the System Dynamics Society (2004)Ferrada, F.: C-EMO: A Modeling Framework for Collaborative Network Emotions Doctoral dissertation, Nova University of Lisbon, Portugal (2017). https://run.unl.pt/handle/10362/26857Scherer, K.R.: Emotions are emergent processes: they require a dynamic computational architecture. Rev. Philos. Trans. R. Soc. Biol. Sci. 364(1535), 3459–3474 (2009

Cognitive impairment induced by delta9-tetrahydrocannabinol occurs through heteromers between cannabinoid CB1 and serotonin 5-HT2A receptors

Delta-9-tetrahydrocannabinol (THC), the main psychoactive compound of marijuana, induces numerous undesirable effects, including memory impairments, anxiety, and dependence. Conversely, THC also has potentially therapeutic effects, including analgesia, muscle relaxation, and neuroprotection. However, the mechanisms that dissociate these responses are still not known. Using mice lacking the serotonin receptor 5-HT2A, we revealed that the analgesic and amnesic effects of THC are independent of each other: while amnesia induced by THC disappears in the mutant mice, THC can still promote analgesia in these animals. In subsequent molecular studies, we showed that in specific brain regions involved in memory formation, the receptors for THC and the 5-HT2A receptors work together by physically interacting with each other. Experimentally interfering with this interaction prevented the memory deficits induced by THC, but not its analgesic properties. Our results highlight a novel mechanism by which the beneficial analgesic properties of THC can be dissociated from its cognitive side effects

The Brazilian Developments on the Regional Atmospheric Modeling System (BRAMS 5.2): An Integrated Environmental Model Tuned for Tropical Areas

We present a new version of the Brazilian developments on the Regional Atmospheric Modeling System where different previous versions for weather, chemistry and carbon cycle were unified in a single integrated software system. The new version also has a new set of state-of-the-art physical parameterizations and greater computational parallel and memory usage efficiency. Together with the description of the main features are examples of the quality of the transport scheme for scalars, radiative fluxes on surface and model simulation of rainfall systems over South America in different spatial resolutions using a scale-aware convective parameterization. Besides, the simulation of the diurnal cycle of the convection and carbon dioxide concentration over the Amazon Basin, as well as carbon dioxide fluxes from biogenic processes over a large portion of South America are shown. Atmospheric chemistry examples present model performance in simulating near-surface carbon monoxide and ozone in Amazon Basin and Rio de Janeiro megacity. For tracer transport and dispersion, it is demonstrated the model capabilities to simulate the volcanic ash 3-d redistribution associated with the eruption of a Chilean volcano. Then, the gain of computational efficiency is described with some details. BRAMS has been applied for research and operational forecasting mainly in South America. Model results from the operational weather forecast of BRAMS on 5 km grid spacing in the Center for Weather Forecasting and Climate Studies, INPE/Brazil, since 2013 are used to quantify the model skill of near surface variables and rainfall. The scores show the reliability of BRAMS for the tropical and subtropical areas of South America. Requirements for keeping this modeling system competitive regarding on its functionalities and skills are discussed. At last, we highlight the relevant contribution of this work on the building up of a South American community of model developers

Creative innovation in Spanish construction firms

"This material may be downloaded for personal use only. Any other use requires prior permission of the American Society of Civil Engineers"Small and medium-sized contractors are characterized by organizational structures that are highly focused on control. As a result, employees concentrate on day-to-day activities with little time or motivation to generate creative ideas. Generally, the technological improvements of these companies arise as a result of problem-solving at the construction site. Nevertheless, the actual status quo is changing. In fact, some Spanish public agencies are already considering innovation as an added value in public procurement; thus, large contractors are starting to systemize their innovative efforts. This means that small and medium-sized enterprises must modify their attitudes towards innovation in order to sustain their competitiveness. The implementation of a system that enhances innovation and acquisition of knowledge may be the solution to overcome this disadvantage. The authors analyzed the implementation of an innovation management system in a Spanish construction firm of medium size for nine years. The system builds on a set of processes aimed to generate innovation projects that allow the contractor to document the innovation, not only for internal purposes related to knowledge management, but also for external ones associated with obtaining better results in public tenders. These processes are: (a) technology watch; (b) creativity; (c) planning and executing innovation projects; (d) technology transfer; and (e) protection of results. The last step is the feedback of the entire process through the assessment of the final outcomes. The implementation of the innovation system is ensured within the organization, through training of personnel, participation of stakeholders and encouragement of the innovation culture.The research reported in this paper was partially funded by the Universidad Catolica del Maule (UCM) [Project Mejoramiento de la Calidad y Equidad de la Educacion Superior (MECESUP)-UCM0205], the Spanish Ministry of Infrastructure (Project 2004-36), and the Universitat Politecnica de Valencia (UPV) (Contract UPV-2008-0629). Francisco Vea, Ricardo Lacort, and Manuel Civera are thanked for their help and support throughout the implementation of the system. Dr. Debra Westall is thanked for revising the text.Yepes, V.; Pellicer Armiñana, E.; Fernando Alarcón, L.; Correa Becerra, CL. (2015). Creative innovation in Spanish construction firms. Journal of Professional Issues in Engineering Education and Practice. 141:04015006-1-04015006-10. https://doi.org/10.1061/(ASCE)EI.1943-5541.0000251S04015006-104015006-1014